Tech: Performance and Use Cases of VMware DirectPath I/O for Networking

Posted by Kenneth van Surksum   |   Friday, December 10th, 2010   |  

The VMware Performance team has posted an blog article detailing the performance and use cases of using VMware DirectPath I/O. DirectPath I/O is a technology available since vSphere 4.0 to allow guests to directly access hardware devices trough hardware support, like Intel VT-D and AMD-Vi. A VM with DirectPath I/O can directly access the physical NIC instead of using an emulated/paravirtualized one, providing additional performance by saving CPU cycles and giving access to hardware features not yet supported by vSphere, like TCP Offload engine or SSL offload. VMware recommends using DirectPath I/O only for workloads with very high packet rates.

Ofcourse using hardware directly within a VM has some disadvantages as well, the NIC attached to the DirectPath I/O VM cannot be shared with other VM’s anymore, and the NIC can also not be used for features like vMotion and Network I/O control.

clip_image001

VMware did a performance review of using DirectPath I/O compared to emulated network. Resulting in the following graph generated using netperf, detailing the performance gain when using high packet rates. Also stating that when using low packet rates, the added value is not significant.

clip_image002

Also the performance of DirectPath I/O compared to a virtual NIC was compared for three scenario’s, one web server workload and two database workloads. Measuring load of users requesting data from a web server, resulting in a 15% more users per %CPU used.

clip_image003

For the database tests though, there is no remarkable performance gain measured due to the low packet rate.

Also the performance of a OLTP workload was measured with SAP and DB2, where in that specific situation the Virtual NIC out performed the DirectPath I/O by about 3% in a default configuration, which could be zeroed by setting memory reservations for the virtual NIC configuration.

Conclusion:

"…DirectPath I/O is intended for specific use cases. It is another technology VMware users can deploy to boost performance of applications with very high packet rate requirements…"


Labels: ,

blog comments powered by Disqus


virtualization.info Newest articles
Release: VMware vRealize Log Insight 4.5

June 13th, 2017

Log Insight is a log aggregation, management and analysis tool, that VMware first introduced in 2013 and considered a competitor of Splunk.
Yesterday VMware announced the release of version 4.5, available for…

Release: VMware vRealize Automation 7.3

June 6th, 2017

Today VMware announced the latest release of its cloud management platform vRealize Automation, former vCloud Automation Center.
VMware vRealize Automation 7.3 release notes can be found at this link.

The…

Paper: Introducing the NSX-T Platform

February 9th, 2017

“We see greater potential strategic opportunity in NSX over the next decade than our franchise product vSphere has had for the past decade.”
said VMware’s CEO Pat Gelsinger talking about…

Paper: VMware vSphere Virtual Machine Encryption Performance

November 22nd, 2016

Encryption of virtual machines is something that has been requested for years by the security community. VMware continued to postpone its implementation due to the negative operational impact that many…

Quest Software leaves Dell

November 1st, 2016

In September 2012 Dell announced to have completed the acquisition of Quest Software, a Californian company with an history in systems management, security, business intelligence and, falling back in our…

Citrix announces Q3 2016 results

October 21st, 2016

Citrix announced its financial results for third quarter 2016.
The revenues for the second quarter were $841 million for an increase of 3% compared to Q3 2015.
Net income was $132…

Release: VMware vSphere 6.5 & Virtual SAN 6.5

October 19th, 2016

2016 edition of VMworld US has been quite turbulent, on the other hand during VMworld Europe, happening these days in Barcelona, the company announced a few more products for the…

Release: VMware vRealize Log Insight 4.0

October 18th, 2016

Log Insight is a log aggregation, management and analisys tool, that VMware first introduced in 2013 and now is usually compared with Splunk.
Yesterday VMware announced Log Insight’s new major…

Release: Windows Server 2016 with support for Window Server & Hyper-V containers

October 13th, 2016

Yesterday Microsoft announced the general availability of Windows Server 2016 which the company defines as a cloud-ready OS.
Beside fancy definitions, one of the most relevant perks of this release…

Release: Oracle VM 3.4.2

September 22nd, 2016

During Oracle OpenWorld 2016 the company released version 3.4.2 of its enterprise virtualization solution.
Oracle VM is available for both x86 and SPARC based processor architectures and uses the Xen hypervisor…

VMworld US 2016 Wrap-up

September 1st, 2016

Today was the last day of VMware’s flagship conference VMworld in Las Vegas, an highly controversial edition which left a good chunk of the audience disoriented if not properly disappointed….

Gartner releases its Magic Quadrant for Cloud Infrastructure as a Service for 2016

August 11th, 2016

Last week Gartner updated its Magic Quadrant for Cloud Infrastructure as a Service (IaaS) for the year 2016. The Magic Quadrant for the year 2015 was released in May last year…

Release: Ansible Tower 3 by Red Hat

August 2nd, 2016

Ansible is one of the four main players in the automation market, younger then the well known Chef and Puppet, has been launched in 2013 in Durham, N.C. and acquired…

IBM announces earnings for Q2 2016

July 19th, 2016

Yesterday IBM announced its results for Q2 2016.

If we compare with the same quarter in 2015 earnings per share, from continuing operations, decreased 22%. Net income, from continuing operations,…

 
Monthly Archive